Payment & Shipping Terms:
|Stencil Printer:||300*400mm (3040)||Pnp Machine:||CHMT36VA (29 Feeder 2 Heads + Double Vision Camera)|
|Reflow Oven:||T962A 300*320mm Soldering Size 1500W||Usage:||Small Batch Production|
Hot SMT Prodcution Line: CHMT36VA + 3040 Stencil Printer + Reflow Oven T962A
English Version 220v / 110v Supported / CE Declaration
Small SMT Production line:
1. High precision stencil printer 3040:
|Work table size||300*400mm|
|Max net frame size||370*470mm|
|Thickness of the substrates||0-80mm|
|The workbench adjust volume||10mm, Horizontal Angle adjustment|
|Printing platform height||220mm|
|locate mode||Benchmark or hole shape|
2. CHMT36VA pick and place machine (work with external PC)
|PCB area||10mm*10mm - 355mm*355mm|
|X Y axis Travel||420*460mm|
|Z axis moving range||15mm|
8mm=22pcs, 12mm=4pcs, 16mm=2pcs, 24mm=1pcs,
Front IC tray=14pcs, user-defined IC tray
|Vision system||Dual cameras(up & down cameras)|
|Drive||Closed-loop control stepper servo drive system, make sure never lose step|
|Z axis self-return detection||Yes, prevent nozzles breaking|
|Pull pin self-return||Yes, prevent pull pin breaking|
|Leakage of material detection method||Vacuum detection, vision detection|
|Mounting speed||4000cph (vision off); 2800cph (vision on)|
|Components||0402-5050,SOP,QFN,(tape width: 8MM,12MM,16MM,24MM)|
|Machine dimension||L 960mm * W 705mm * H 335mm|
|Vacuum pump||-92KPA (2pcs,build-in, mute type)|
|External air source||No need (machine build-in mute vacuum pump 2pcs)|
|External PC||Yes (software compatible with windows7)|
|Voltage||220V (110V),50Hz 60Hz|
|Compatible software||Altium designer,Protell99SE,PADS,Kicad,Eagle,Cadint,Cadence Orcad,Cadence Allegro,PROTEUS..etc|
3. T962A Reflow oven parameter (new updated with fan):
Soldering Max Area: 20 X 20 cm
Rated Power: 1500W
Supply: AC110V~ AC220V /50~60HZ
Pictures as follows:
1. Stencil printer 3040 (high precision)
2. CHMT36VA Pick and place machine with Vision System (need external PC)
1. Convenient software, Embedded Linux System of the machine, very stable industry main board, independent operation, no need external computer, operation more easy and convenient.
2. Top and bottom two cameras CCD system correct the position of each components very accurate, especially for IC (max 22*22mm).
3. Machine support all different kinds of components, from 0402, 0603- QFN, as well as cut tape, tube IC, or bulk IC. Machine can place multi kinds of PCB.
4. It has flexible PCB clamping fixture, and it has custom IC tray, front bulk IC feeder, very convenient.
5. The vision also can second correction machine origin point, make sure origin point correct.
6. 2 heads/ 4 heads with high precise Juki Nozzles with magnet, no need to disassemble with wrench, nozzles can rotate angle -180 degree~ +180 degree. Placing height is adjustable. 4 serials machine max components height is 5mm and 5 serails machine max height is 10mm.
7. 4 serails machine's pull pin automatically return to avoid nozzles broken, pull pin not be stuck. 5 serial's machine using Yamaha pneumatic feeder auto feeding, more faster speed.
8. Z axis detection, placement head can auto detect the height and angle, auto back to origin to prevent any broke.
9. Closed-loop control, X,Y Axis with encoder, motor never lose steps.
10. PCB calibrate by two vision cameras (machine will auto find 2 points), amend the offset of PCB. Only calirbate 2 points, rest components will auto correction, calibration can be rapidly and accurately for PCB, do not need to care about offset, no need to calculate the input.
11. Comes with vacuum detection, if one component suck crooked, it will automatically throw it to the feed zone, then pick a new one to mount again.
12. Comes with vision detection, camera will auto correct component angle and place onto PCB board in right place. If heads not picking up components, camera will detect it and go back to pick again, 3 times not picking, machine will alarm and stop.
13. If lack material it will automatic detection, then alarm; after supply material, then continue working, no need to re-start.
14. Support any number of PCB batch.
15. If no PCB file, or don’t use software load out work file, you can create a new file to program.
16. Comes with convert tool (PC version), edit work file in computer and load work file into machine by USB port, quick and convenient.
17. Support single step.
3. Reflow oven T962A (NEW TYPE WITH FAN)
Why choose Charmhigh?
1.Professional desgin and room saved.
2.User friendly operation, no need professional SMT engineer, entry-level device
3.One machine - Integrated operation, no need extra pump or PC or any supporting facility
4.High accuracy and reliability,make up the defection of manual work
5.Cost efficient, reduce expense to own a professional automatic SMT production line
6.International express with door to door service,3-5 working days delivery
7.Especial for laboratory research and development,samples,to avoid any patents and designs revealment.
8.One machine equal to 5 soldering staff, easy manage and cost-saved. Good for small batch production.
9.Charmhigh Is factory supply, all of our machines parts are researched and manufacturing by ourselves. After-service spare parts never stop.
10. Charmhigh is a professional manufacturer of SMT Pick and Place machine since 2009. All the software are researched by ourselves.
Q1: What is the lead time of your products? (How long do you need to prepare my goods?)
A: 2-3 days for 1-3 unit machine. 5-15 days for mass production orders (based on different quantities).
Q2: How will you deliver my goods to me?
A: We usually ship by international expresses such as DHL,UPS, FedEx, TNT to enable our customers get their goods rapidly. For bigger quantity, ship by air or by sea.
Q3: How long do I need to wait before my goods arrive?
A: 3-7 days for international express. 5-8 days for air transportation. 20-40 days for sea transportation.
Q4: What is your product quality?
A: Our raw materials are purchased from qualified suppliers, the best qaulity in China. And our engineers all have over 20 years expereinces in Machinery, ensure good quality and functions. Now CharmHigh's Quality and feedback is better than other brands in China.
Standard package service:
The package of our P&Ps is standard export wooden package to avoid the damage during the transportation.
For package below 200 kg , you can use DHL, Fedex or other express company, For large quantities, you could use sea delivery.
The complete machine has a warranty period of 1 year from the time of purchase and lifetime service.
We always provide spare parts of machine, factory reliable direct supply.
We provide online Q/A and troubleshooting support and technical advice service.
Provide one to one after-sale service.
Each machine 100% test well before ship out.
Kimi Mob: 0086 135 106 75756