Payment & Shipping Terms:
|Nozzles:||4 Types Of Nozzle (Juki)||Speed:||5000cph With Vision|
|Accuracy:||0.025mm||X,Y,Z Axis Travel:||600*630*20mm|
|Pcb Area:||10*10mm ~ 400*270mm|
4 Heads 60 Feeders CHMT560P4 Advanced Desktop SMT pick and place machine,
work with Yamaha pneumatic feeder 8mm 12mm 16mm 24mm
Advanced Pick and Place Machine 110v 220V English Version CE Passed
Please find Video in Youtube link:
CHMT560P4 working video:
4 heads 60pcs feeders pnp machine CHMT560P4 simple look:
This CHMT560P4 is an updated model from CHMT530P4 which has 60 feeders with 4 heads Juki Nozzle placement, more material supported with high speed mounting, working with Yamaha pneumatic feeders 8mm 12mm 16mm 24mm, and also Yamaha vibration feeder accept by customer in market, very table and convenient! This machine for small smt production is your good helper!
The operation system is industry level embedded Linux system, the main board of machine was researched by ourself, which is more relaible than windows system, and life time is much longer. CHMT560P4 using 502---507 different kinds of Juki nozzles, suitable for 0402,0603,0805-5050, SOP,QFN,LQFP,Diode,Transistor,BGA...etc, which can meet more customers' demand.
Charmhigh CHM-T560P4 Technical Parameters
|XYZ Axis travel||600mm(X)×630mm(Y)×20mm(Z)|
|PCB max size||400mm(L)×270mm(W)|
|Support components||0201-0402-5050, SOP, QFN,BGA etc.|
|Placement head||4 heads|
Support max 30pcs 8mm Pneumatic feeder (other options: 12,16,24mm,vibration feeder)
|Vision detection||Double camera (up & down) support max size of IC:22*22mm|
|Components leakage detection||Vacuum and visual detection|
|Main board||High-reliability industry motherboard|
|Touch Screen||7 inches industry screen, externel mouse control supported|
|Operation system||Embedded Linux system|
|External air source||0.5MPa|
|Power supply||AC220V 50Hz / AC110V 60Hz|
Charmhigh SMT pick and place machine Competitive Advantage:
1. Convenient software, Embedded Linux System of the machine, very stable industry main board, independent operation, no need external computer, operation more easy and convenient.
2. Top and bottom two cameras CCD system correct the position of each components very accurate, especially for IC (max 22*22mm).
3. Machine support all different kinds of components, from 0402, 0603- QFN, as well as cut tape, tube IC, or bulk IC. Machine can place multi kinds of PCB.
4. It has flexible PCB clamping fixture, and it has custom IC tray, front bulk IC feeder, very convenient.
5. The vision also can second correction machine origin point, make sure origin point correct.
6. 2 heads/ 4 heads with high precise Juki Nozzles with magnet, no need to disassemble with wrench, nozzles can rotate angle -180 degree~ +180 degree. Placing height is adjustable. 4 serials machine max components height is 5mm and 5 serails machine max height is 10mm.
7. 4 serails machine's pull pin automatically return to avoid nozzles broken, pull pin not be stuck. 5 serial's machine using Yamaha pneumatic feeder auto feeding, more faster speed.
8. Z axis detection, placement head can auto detect the height and angle, auto back to origin to prevent any broke.
9. Closed-loop control, X,Y Axis with encoder, motor never lose steps.
10. PCB calibrate by two vision cameras (machine will auto find 2 points), amend the offset of PCB. Only calirbate 2 points, rest components will auto correction, calibration can be rapidly and accurately for PCB, do not need to care about offset, no need to calculate the input.
11. Comes with vacuum detection, if one component suck crooked, it will automatically throw it to the feed zone, then pick a new one to mount again.
12. Comes with vision detection, camera will auto correct component angle and place onto PCB board in right place. If heads not picking up components, camera will detect it and go back to pick again, 3 times not picking, machine will alarm and stop.
13. If lack material it will automatic detection, then alarm; after supply material, then continue working, no need to re-start.
14. Support any number of PCB batch.
15. If no PCB file, or don’t use software load out work file, you can create a new file to program.
16. Comes with convert tool (PC version), edit work file in computer and load work file into machine by USB port, quick and convenient.
17. Support single step.
Standard Accessories for CHMT560P4:
1) Pick and Place Machine CHMT560P4: 1
2) Juki nozzle total 4pcs (503, 504, 505, 506 size)
3) 8G USB driver 1
4) Power Cord 1
5) Grease 1
6) Hex wrench 6
7) Tweezers 1
8) Brush 1
9) Additional belt set 1
10) Pen for touch screen 1
11) Fixture for IC tray 4
12) English user manual 1
X Y axis with square rail, higher accuracy:
User-definet IC tray, you can fixed IC tray on the panel anywhere:
USB Mouse and touch screen both supported:
X Y axis motor with encoder, closed-loop contro, not lose steps:
Full touch screen operation, no need external monitor or computer, very easy operation:
Juki nozzles: (Different types 502-506)
Why choose Charmhigh?
1.Professional desgin and room saved.
2.User friendly operation, no need professional SMT engineer, entry-level device
3.One machine - Integrated operation, no need extra pump or PC or any supporting facility
4.High accuracy and reliability,make up the defection of manual work
5.Cost efficient, reduce expense to own a professional automatic SMT production line
6.International express with door to door service,3-5 working days delivery
7.Especial for laboratory research and development,samples,to avoid any patents and designs revealment.
8.One machine equal to 5 soldering staff, easy manage and cost-saved. Good for small batch production.
9.Charmhigh Is factory supply, all of our machines parts are researched and manufacturing by ourselves. After-service spare parts never stop.
10. Charmhigh is a professional manufacturer of SMT Pick and Place machine since 2009. All the software are researched by ourselves.
The pick and place machine is complete set with all accessories included in the package, ready to use!
You only need to get an external air compressor(supplying air for feeders) before running.
Good after-sale tech support, please purchase it with confidence.
Enjoy with your pick and place machine!
The complete machine has a warranty period of 1 year from the time of purchase and lifetime service.
We always provide spare parts of machine, factory reliable direct supply.
We provide online Q/A and troubleshooting support and technical advice service.
Provide one to one after-sale service. Each machine 100% tested well before ship out.
Kimi Mob: 0086 135 106 75756
Welcome to follow us in YouTube: www.youtube.com/channel/UCKRczL5Hywx59M_2SWGJOsA/videos
If you want to see more information and videos, please contact us by E-mail.
We will response you at the first time.