|Feeder:||30pcs Pneumatic Feeders||Placement Head:||4 Heads|
|Nozzles:||Juki Nozzle||Speed:||4200cph With Vision; Without Vision 7200cph|
4 Heads Tabletop Pick And Place Machine,
30 Feeders Tabletop Pick And Place Machine,
30 Feeders SMD Placement Machine
4 Heads SMT pick and place machine CHMT530P4 with Yamaha pneumatic feeder 8mm 12mm 16mm
Advanced Pick and Place Machine 110v 220V English Version CE Passed
Charmhigh CHM-T530P4 Technical Parameters
|XYZ Axis travel||650mm(X)×760mm(Y)×15mm(Z)|
|PCB max size||450mm(L)×330mm(W)|
|Support components||0201-0402-5050, SOP, QFN,BGA etc.|
|Placement head||4 heads|
l Support max 30pcs 8mm Pneumatic feeder (other options: 12,16,24mm,vibration feeder)
|Vision detection||Double camera (up & down)|
|Components leakage detection||Vacuum and visual detection|
|Main board||High-reliability industry motherboard|
|Touch Screen||7 inches industry screen|
|Operation system||Embedded Linux system|
|External air source||0.5MPa|
|Power supply||AC220V 50Hz / AC110V 60Hz|
1. Convenient software, Embedded Linux System of the machine, very stable and fast speed, independent operation, no need external computer, operation more easy and convenient.
2. Industry touch screen, more stable, high quality.
3. Top and bottom two cameras CCD system correct the position of each components very accurate, especially for IC.
4. It has flexible PCB clamping fixture, and it has user-defined IC tray from stack NO.80. convenient and quick.
5. The vision also can second correction machine origin point, make sure origin point correct.
6. With two nozzles placing heads, high precise Juki Nozzles with magnet, no need to disassemble with wrench. 2 nozzles arbitrary rotation angle -180 degree~ +180 degree. Placing height can adjustable.
7. Pull pin automatically return to avoid nozzles broken, pull pin not be stuck, big progress.
8. Z axis detection, placement head can auto back to origin.
9. Closed-loop contro, X,Y Axis with encoder, never loose steps.
7. PCB by two visual calibration, first and last componet, amend the offset of PCB.
8. Calibration can be rapidly and accurately for PCB, do not need to care about offset, no need to calculate the input.
9. Comes vacuum testing, with automatic feeding; if one component suck crooked, it will automatically throw it to the feed zone, then pick a new one to mount again.
10. If lack material it will automatic detection, then alarm; after supply material, then continue working, no need to re-start.
11. Support any number of PCB batch.
12. If no PCB file, or don’t use protell software, you can creat a new file to program. Support single step.
Why choose Charmhigh?
1.Light weight body,occupy small area
2.User friendly interface,no need professional SMT engineer,entry-level device
3.High integrated,no need extra pump or any supporting facility
4.High accuracy and reliability,make up the defection of manual work
5.Low cost,reduce expense to own a professional automatic SMT production line
6.International express with door to door service,3-5 working days delivery
7.Especial for laboratory research and development,samples,to avoid any patents and designs revealment
Standard Accessories for CHMT530P4:
1) Pick and Place MachineCHMT48VB: 1
2) Juki nozzle: Totally 8pcs (503, 504, 505, 506 size 2pcs each)
3) 8G USB flash 1
4) Power Cord: 1
5) Pull pins: 2
6) Coil for pull pin:2
7) Camera positioning adjust black board: 1
8) Hex wrench: 6
9) Tweezers: 1
10) Brush: 1
11) English user manual: 1
Top and Bottom camera, make sure each component place very accurate:
4 placement heads which speed is much faster:
X Y axis motor with encoder, closed-loop control, make sure not lose steps:
User-defined IC Tray:
Full touch screen operation, no need externel monitor or computer, veyr easy operation:
Juki Nozzles, very easy opearation, magnet inside, no need to use wrench to pull down
It can install vibration feeder too!
The complete machine has a warranty period of 1 year from the time of purchase and lifelong service
support as well as a long term factory price supply.
We provide online Q/A and troubleshooting support and technical advice service. Provide one to one after-sale service.
Each machine 100% test well then sent out.
Kimi Mob: 0086 135 106 75756
Skype: kimiliu89 .
If you want to see more information and videos, please contact us by E-mail.
We will response you at the first time.
Contact Person: Kimi Liu