T960E Benchtop LED / Infrared SMT Reflow Oven BGA Infrared SMD Rework Station

Leaded & Lead-free T960E LED 4.5kw Reflow Oven Infrared Reflow Oven 960mm* 300mm 220v- 380V 50/60Hz

Technical parameters

Main components:

1 x Reflow Oven Machine

1 x Cable

1 x User Manual

Features:

1. This machine selects the intelligent level sirocco and rapid infrared heating technology controlling, equipped with special design wind wheel, speed stability and uniform temperature, suit for uninterrupted soldering the LED and BGA components.

2. This machine is equipped with the crawler-type and five temperature area heating systems, and each temperature area uses independent PID controlling and up-down heating type, can make the inside temperature more accurate and well-proportioned, just take about 20 minutes can let it heat up to the working temperature from the room temperature.

3. Intelligent temperature wave heating type, oversized capacity wave selection, have eight temperature waves can satisfy various welding technological requirements.

4. Use programmable technology, preset the temperature wave memory storage function, can complete the whole welding process automatically according to your presetting wave.

5. Adopt the thermocouple temperature measurement and add the compensation circuit, make the temperature measurement more accurate, the wave more perfect.

6. Use PID intelligent temperature control technology; make the temperature control more accurately. Adopt the imported large current solid-state relay non-contact output can effectively avoid the IC or circuit board damage due to the rapid or uninterrupted warming up, make the whole welding process more scientific safety.

7. Transmission system adopt imported frequency conversion motor, PID closed-loop speed, equip with all the import 1:150 turbine speed reducer, smooth operation, speed adjustable range 0-1600mm/min.

8. Adopt independent wheel structure and special stainless steel strut, durable wear-resisting runs smoothly, speed precision can reach ±10mm/min.

9. Independent cooling zone, to ensure the PCB board of low temperature when the required.

10. Friendly human-machine operation interface, perfect LCD display, no need to connect with the PC, can watch the whole repairing process very clearly.

11. Ergonomic design, practical and easily operated. Good build quality but at the same time light weight and a small footprint allows the T-960e to be easily bench positioned, transported or stored.

Note:

1. The machine must be grounded.

2. The person in charge of the operation.

3. The drive chain 7 days plus a high temperature lubricant.

4. Do not place near flammable dangerous goods present reflow machine.

5. Do not reach into the normal working reflow machine.

6. Do not put foreign objects in the online transmission.

Routine maintenance:

1. Keep the cabinet clean.

2. Check the fan sleeve is loose.

3. Check the fan and electric motor.

4. Are there abnormal sound, check the fan drive is flexible.

5. Check out whether there are foreign objects blocking the vent.

6. Check the transmission belt is too loose.

7. Check whether there is abnormal sound electrical power box.

8. Check the transmission parts are loose and abnormal sound.

9. To check the machine before starting the operating voltage is within the safe range or is stable, in order to ensure safe operation of the components may be normal. Also check the power and check the various parameters are the same when the last shutdown. Do not allow the shutdown to stop the conveyor belt in the machine is still at a high temperature to avoid conveyor belt at high temperatures accelerate aging, it is best to let the machine temperature is lowered again to stop the conveyor belt.

10. Lubricate the drive wheel, with a high temperature lubricant smear every two months.

11. Operation of the machine the motor speed at a high temperature long term, be less than twice a week Add thereto WHEEL temperature oil to maintain its smooth functioning.

12. Clean the sticky and motor in a variety of residue on the blades, so as not to cause a short circuit aging or burn fan.

13. When the machine uses a three-phase five-wire system, the machine must be grounded.

Pictures as follows:

Good for LED soldering, very high quality and high feedback.

Kindly note:
This machine is complete set with all accessories included in the package, QC passed.  
We provide timely after-sales service, each machine 100% tested well before ship out. Please purchase it with confidence.
Enjoy with your pick and place machine!

Service & Warranty:
The complete machine has a warranty period of 1 year from the time of purchase and lifetime service.
We always provide spare parts of machine, factory reliable direct supply.
We provide online Q/A and troubleshooting support and technical advice service.
Provide one to one after-sale service. Each machine 100% tested well before ship out.
Tech support & Contact:
Kimi Liu
Charmhigh Technology Limited
Mob/ WhatsApp: 0086 135 106 75756
Skype: kimiliu89
E-mail: kimi@charmhigh-tech.com

Welcome to follow us in YouTube: www.youtube.com/channel/UCKRczL5Hywx59M_2SWGJOsA/videos
If you want to see more information and videos, please contact us by E-mail.
We will response you at the first time.