T960W 4.5KW PCB Soldering Machine LED Reflow Oven Lead Free Heating Machine

Lead-free T960W Reflow Oven For LED 960mm* 300MM Net Transmission＋Chain Transmission
4.5kw, 220v - 380v CE Declaration
 
Technical parameters

 
Feature:
1. This machine uses infrared technology to strengthen the hot air heating system, equipped with special design wind wheel wind speed stability, temperature uniformity for the bulk of new LED light source, BGA components uninterrupted welding;
2. The machine is equipped with crawler, five-zone heating system, independent of each temperature zone using forced circulation, independent PID control, upper and lower independent heating, the temperature of the furnace chamber accurate, uniform, large heat capacity, fast heating from room temperature to operating temperature less than or equal 20 min;
3. smart curve heating, large capacity curve selection, with eight technology curve can meet the requirements of all types of welding processes;
4. programmable control technology, the preset memory function curve, according to your preset curve automate the entire welding process;
5. measured using a thermocouple temperature, and add a compensation circuit, the temperature measurement is more accurate, so that the curve is more perfect;
6. PID intelligent temperature control technology, allowing more accurate temperature control, no import high current solid state relay contact output can effectively avoid rapid warming or uninterrupted. warming caused by the chip or circuit board is damaged, the entire welding process more scientific and safety;
7. imported inverter motor drive system, PID closed loop speed control, with 1: 150 imported turbine reducer, smooth operation, adjustable speed range 0-1500mm / min; 
8. Using independent wheel structure and the care level, special stainless steel mesh belt B word, durable wear-resistant smooth operation, precise speed of up to plus or minus 10mm / min;
9. separate cooling zones, to ensure that the low temperature of the PCB when the board of the required;
10. friendly man-machine interface, perfect LCD without a PC connected with the whole heating process at a glance;
11. fortitude appearance, compact size, from start to finish embodies technology-based. Mesa-type placement mode, so you have more space; the simple instructions, so you'll see.
 
Technical parameters:
Product Type: T-960W
Number of heating zones: under 3 / down 2
Heating zone length: 960mm
Heating: Infrared strengthen the system of hot air
Number of cooling zones: 1
PCB maximum width: 300MM
Transport direction: Left → right
Transmission: network transmission + chain drive
Conveyor belt speed: 0-1500mm / min
Power 3-phase 5-wire 380V 50 / 60Hz
Power Peak power: 4.5KW
Warm-up time: 15 minutes or so
Temperature control range: room temperature ~ 350 Degrees Celsius
Temperature control: PID closed-loop control
Temperature control accuracy: ± 1 Degrees Celsius
PCB board temperature distribution deviation: ± 2 Degrees Celsius
Dimensions (L * W * H): 1450 x 630 x 470 mm
Weight: 150 KG
 
Main components:
1 x Reflow Oven Machine
1 x Cable
1 x User Manual
 
Note:
1. The machine must be grounded.
2. The person in charge of the operation.
3. The drive chain 7 days plus a high temperature lubricant.
4. Do not place near flammable dangerous goods present reflow machine.
5. Do not reach into the normal working reflow machine.
6. Do not put foreign objects in the online transmission.
 
Routine maintenance:
1. Keep the cabinet clean.
2. Check the fan sleeve is loose.
3. Check the fan and electric motor.
4. Are there abnormal sound, check the fan drive is flexible.
5. Check out whether there are foreign objects blocking the vent.
6. Check the transmission belt is too loose.
7. Check whether there is abnormal sound electrical power box.
8. Check the transmission parts are loose and abnormal sound.
9. To check the machine before starting the operating voltage is within the safe range or is stable, in order to ensure safe operation of the components may be normal. Also check the power and check the various parameters are the same when the last shutdown. Do not allow the shutdown to stop the conveyor belt in the machine is still at a high temperature to avoid conveyor belt at high temperatures accelerate aging, it is best to let the machine temperature is lowered again to stop the conveyor belt.
10. Lubricate the drive wheel, with a high temperature lubricant smear every two months.
11. Operation of the machine the motor speed at a high temperature long term, be less than twice a week Add thereto WHEEL temperature oil to maintain its smooth functioning.
12. Clean the sticky and motor in a variety of residue on the blades, so as not to cause a short circuit aging or burn fan.
13. When the machine uses a three-phase five-wire system, the machine must be grounded.
 
Pictures as follows:

 

 

 

 
Q1: What is the lead time of your products? (How long do you need to prepare my goods?)
A: 2-3 days for 1-3 unit machine. 5-15 days for mass production orders (based on different quantities).
 
Q2: How will you deliver my goods to me?
A: We usually ship by international expresses such as DHL,UPS, FedEx, TNT to enable our customers get 
their goods rapidly. For bigger quantity, ship by air or by sea.
 
Q3: How long do I need to wait before my goods arrive?
A: 3-7 days for international express. 5-8 days for air transportation. 20-40 days for sea transportation.
 
Q4: What is your product quality?
A: Our raw materials are purchased from qualified suppliers, the best qaulity in China. And our engineers all have over 20 years expereinces in Machinery, ensure good quality and functions. Now CharmHigh's Quality and feedback is better than other brands in China.  
 
Service & Warranty:
The complete machine has a warranty period of 1 year from the time of purchase and lifetime service.
We always provide spare parts of machine, factory reliable direct supply.
We provide online Q/A and troubleshooting support and technical advice service.
Provide one to one after-sale service. Each machine 100% tested well before ship out.
Tech support & Contact:
Kimi Liu
Charmhigh Technology Limited
Mob/ WhatsApp: 0086 135 106 75756
Skype: kimiliu89
E-mail: kimi@charmhigh-tech.com
Welcome to follow us in YouTube: www.youtube.com/channel/UCKRczL5Hywx59M_2SWGJOsA/videos
If you want to see more information and videos, please contact us by E-mail.
We will response you at the first time.